How To Write Physics In Style

How To Write An Awesome Stable Diffusion Prompt

Nick Lewis

Nick Lewis is a staff writer for How-To Geek. He has been using computers for 20 years — tinkering with everything from the UI to the Windows registry to device firmware. Before How-To Geek, he used Python and C++ as a freelance programmer. In college, Nick made extensive use of Fortran while pursuing a physics degree. Read more…

Stable Diffusion, a popular AI art generator, requires text prompts to make an image. Sometimes it does an amazing job and generates exactly what you want with a vague prompt. Other times, you get suboptimal outputs. Here are some tips and tricks to get ideal results.

How Detailed Should It Be

Unless you’re going to become a professor at university, your thesis will be probably the most extensive piece of writing you’ll ever compose. This means that it has to be quite detailed. Physics is not a simple science, and once you start putting your research into words, you’ll notice that you need lots of them to explain all complexities. However, keep in mind the fact that your thesis will likely be read only by people who are qualified in the field so there is no need to explain things that a common physicist already knows.

How To Write A Stable Diffusion Prompt

If youve spent any time at all with AI image generators, like Stable Diffusion, DALL-E, or MidJourney, youll have noticed that a well-worded prompt critical. A well-worded prompt is the difference between turning your idea into a great image and getting some uncanny-valley monstrosity with entirely too many fingers staring back at you.

RELATED

People have been trying to suss out the best ways to get ideal results since Stable Diffusion launched in August 2022, and theyll be prompt smithing or prompt engineering for years to come. That is especially likely since the checkpoints that inform how Stable Diffusion generates images will receive periodic updates. The ideal prompt is going to be a moving target for the foreseeable future.

RELATED:The Best AI Image Generators You Can Use Right Now

You May Like: What Is Density In Chemistry

Create Correct Reference Lists

Creating an acceptable reference list is an important part of every report, and therefore also an important part of your thesis. You have several possibilities for placing references:

• As part of the text
• At the bottom of the page
• At the end of the thesis

A reference list at the end of the thesis is probably less disturbing than references on each page.

A reference shall contain:

The surname of the author, the given name , the title, the ISBN , the edition, the place of publication, the publisher, and the publishing date.

ISO has two recommendations, R 77 and R 690that specifies what a reference list should contain.

Looking For Some Extra Help With Hsc Physics

We have an incredible team of HSC Physics tutors and mentors who are new HSC syllabus experts!

We can help you master the HSC Physics syllabus and ace your upcoming HSC Physics assessments with personalised lessons conducted one-on-one in your home or at one of our state of the art campuses in Hornsby or the Hills!

To find out more and get started with an inspirational HSC Physics tutor and mentor, get in touch today or give us a ring on 1300 267 888!

Yasmin Hasan is a current first year psychology student at UNSW. She loves making art, playing piano or reading in her spare time. She graduated from high school in 2021 so her memories of her own high school experience are still quite fresh. She would love to use her own experiences to help other students build their confidence and improve in their academics!

Read Also: What Does Human Geography Examine

Principles For Constructing Clear Paragraphs

2. Place in the position of importance the new information you

want the reader to emphasize in his or her mind.

3. Place the person or thing whose story is being told at the beginning of a sentence

in the topic position.

4. Place appropriate old information in the topic position

to provide linkage with what has gone before and context for what is to come later.

6. Provide context for your reader before asking him or her to consider anything new.

7. Match the emphasis conveyed by the substance with the emphasis anticipated by

the reader from the structure.

You’llsee immediately that there are many more principles suggested forcomposing clear, logical paragraphs. Paragraphs are ground zero forcomprehension: this is the level at which reader’s understanding mostfrequently breaks down, leading either to mis-understanding or blatantnon-understanding. Frequently, readers experience the communicationbreakdown as a personal failing — they believe it’s their own faultfor not understanding what looks to be straightforward text. Then, theyget angry because the writing has made them feel stupid — or theyassume that your work is simply too advanced for them to follow. Bothcases kill the writer’s citation count, and that is bad for ascientist’s career.

Addendum to #2:a) Cautiously use connectorsto add a bit of zing b) Craft coherencecleverly.

A final quote on science style :

Formatting Requirements

Your First Scientific Paper Ought To Be Good

Structure and Contents of a Master Degree Thesis

This guide was written some years ago as a guideline for students at the Physics Master level at the University of Oslo. I had at that time been the final censor for about 30 students, and I was getting very frustrated of struggling with the thesis trying to find the main points in it. Somebody has already observed that it is Scandinavian-centric of course, it is!

Also Check: Lesson 4 Problem Solving Practice Algebra Write Expressions Answers

One: Brainstorm A Good Topic

It is important to complete a good topic for analysis if you want to impress your teacher and receive the highest scores. It is reasonable to generate a relevant and up-to-date topic if you need to contribute to physics and improve your knowledge about this subject. Some topics are connected with history of physics, while other topics touch upon theories and experiments in this science. You ought to keep to the proper style of writing. Write short and logical sentences. Try to be understandable and precise. Avoid passive voice and support your point of view with up-to-date arguments.

Compulsory Components Of Physics Research Paper Writing

The content of the work contains a list of its structural elements with the indication of the pages. Introduction reveals the essence of the scientific problem, its significance, the bases, initial data for the development of the topic, and justification of the need for research.

The following is a step-by-step description of what goes in the papers introduction:

• The urgency of the problem that determined the choice of the topic for research
• The object of research
• The subject of research
• The purpose and tasks that need to be addressed to achieve the goal
• Research methods used to reach the goal
• Research material and its volume used to accomplish the goal
• The scientific relevance
• The practical value
• The structure of work .

The main part consists of sections, subdivisions, and sub-clauses which provide:

• A review of the specialized literature and the choice of the research areas
• An analysis and results of the research of the author with the obligatory coverage of the new openings that he or she makes in the process of the research.

Each section begins with a new page. The sections of the main part are:

• A review of the literature on the topic
• Analysis of the situation behind the problem
• Description of the research, development, and applied methods
• Information on the local research and development summary of the problems solutions, suggestions, and recommendations
• Generalization of the research results.

You May Like: How To Not Make Silly Mistakes In Math

Write Your Hsc Physics Study Notes In Class

This is a step that is often underrated, but super duper important. As you already know, time management is key during your HSC year.

One way to stay super organised is to listen in your classes, ask questions and write notes as you go!

Collating notes from your classes and revising them as you progress through the term helps you build a good foundational knowledge that will really benefit come exam time.

As you may have heard already, the key to HSC is consistency. In addition to creating lesson notes from your classes, writing out notes for each topic you are covering in class as you are learning it is a really good way to stay on top of your studies, and give yourself plenty of time to revise when exam time nears.

We will expand on how exactly to do this later on!

Chapter : The Conclusion

Now it is time to take a breath and think about what you are doing. The conclusion should not be an extract of the lab journal, but a message to the reader. Imagine that a busy reader is supposed to find the essence of your thesis in 5 minutes. What is he going to read?

• The problem statement

This means that you have to extract the essence of what you want to say in this chapter. How well would you say the project went? Was the requirement specification realized? Are there any promising possibilities for further work? Include it, while doing the best you can in order to sell the results to the reader. This is your Grand Finale, your result depends a lot on how you are able to collect loose threads and finish in style.

Remember:

• To compare your results with the requirement specification. If you do not, the censor will. You can explain deviations better than he can .

Pitfalls

• Making too long a conclusion. Do it in one page .

You May Like: Kuta Software Infinite Algebra 1 Adding Subtracting Rational Expressions

Tweak Other Important Settings

A good prompt is the hardest part of using Stable Diffusion, but there are a few other settings that will dramatically change the results.

• CFG: Determines how strongly Stable Diffusion follows your prompt. Higher numbers result in more adherence to the prompt, whereas lower numbers give the AI more freedom. Try tweaking this first.
• Sampling Method: How the image is refined from noise into recognizable shapes. Try out a few of these. Euler_a, k_LMS, and PLMS seem to be popular choices.
• Sampling Steps: The number of times an image will be sampled before youre given a final result. Sometimes you get good results at 30 steps, sometimes you need to go to 50 or 80. You dont usually get better results above 150 steps. Start with fewer steps and go up.

Think About The Basics

Physics papers describe scientific input, analyze scientific books and articles. For this reason, you need to do something important for your field of study. Ask yourself what you can tell about your subject now that you did not know before the research? Before you start working on the research, consider your predecessors’ physics papers to define the specific issues of your study. While doing the research work, make detailed notes, and put them in chronological order. Then make a plan and put the sources in order.

Recommended Reading: What Does Pcr Stand For In Biology

Some Of Our Favorite Stylized

These are some of our favorite prompts since they tend to work so reliably. Just drop in a subject of your choosing plus a few modifiers. All other Stable Diffusion settings were kept the same as the prompts up above.

Note: As a rule, Stable Diffusion creates sunsets and fall leaves exceptionally well.

Principles For Constructing Clear Sentences

1. Follow a grammatical subject with its verb, as soon as possible.

5. Make clear the action of every clause or sentence in its verb.

Clear,informative sentences are dominated by verbs — the relationship of theverb to its object, the relationship of the verb to the subject, theuse of verbs instead of unnecessary nouns phrases. Ultimately,sentences are subsumed by paragraphs, but there are still some soundtechniques at the sentence level that can make your writing easier tounderstand.

Don’t Miss: What Is Fk In Physics

Chapter : How I Intend To Attack The Problem

This chapter is a transitional chapter, where you are supposed to present a solution to the problem statement in chapter 1. It is solution time! But do not be satisfied with just one with some brainstorming and a bit of fantasy I am sure that you can come up with at least five. Some of the solutions may look promising, some may look hopeless analyze! Can you combine two or more solutions?

Four: Organize Main Body Of Your Paper

When you investigate a topic in physics, you should write it in a logical and formal tone. Observe the background of your theory or experiment, pay attention to its author, its details, etc. One will need to follow his grammar and proper style of writing. Furthermore, it is necessary to conduct calculations properly, because every physics paper consists of a theoretical part with its descriptions and formulas and a practical part with its experiments. Then, you need to conclude your assignment professionally and evaluate the actual usefulness of your research to your field of study. Finally, you need to insert a detailed bibliography section and appendices with tables, graphs and illustrations.

Recommended Reading: What Is Naoh In Chemistry

Three: Compose A Good Introduction

This chapter should inform readers about the major problem and idea of research. You should brainstorm a good thesis statement that will reflect your aim of investigation. Moreover, you will have to evaluate the urgency of your topic and its usefulness to physics. It is necessary to present your methods of research and share your expectations concerning the results of your investigation with your teacher.

Two: Create Logical Outline And Research Your Problem

Every student should plan his process of writing logically. It is reasonable to divide his paper into several sections. Introduce your main points and divide every topic into several related subordinate topics that will illustrate your major issue in detail. Then, go to the library and gather up-to-date textbooks, periodicals and online articles about your topic. It is smart to use relevant sources that contain theory and practical analysis of your issue in physics.

You May Like: What Is Allele In Biology

When Should I Cite A Source

What is Plagiarism?

The DU Honor Code defines plagiarism as “including any representation of another’s work or ideas as one’s own in academic and educational submissions.”

At DU, plagiarism is seen as a form of academic misconduct and can result in severe consequences. These explanations of the most common types of plagiarism from Bowdoin College can help you learn to detect plagiarism in your own and other’s work.

The text above is a direct quote from the Northern Arizona University e-Learning Center’s tutorial. The e-Learning Center was paraphrasing Princeton University’s guidelines.

What is Plagiarism Detection Software?

DU uses a plagiarism detection software called VeriCite. When a student turns in a paper through Canvas, VeriCite checks the internet and many databases to see if anything has been copied from another persons work.

Use Multiple Sources To Create Your Hsc Physics Notes

Sometimes, its just the case that you wont be able to understand how someone explains something and thats okay. However, it is your responsibility to look for alternative explanations.

When writing your notes, collate information from a multitude of sources. Whether this be through YouTube, other books, trustworthy websites a wide range of sources will deepen your understanding of difficult ideas and will make your notes one of the best!

Here are a few places you can look for supplementary material:

If you still dont understand a concept, dont restrain from looking a little bit outside the scope of the syllabus this tends to help a lot by giving you a bigger picture of the ideas you are studying.

Read Also: Math Poems For High School Algebra

Chapter : Technical Details Pertaining To The Chosen Solution

This chapter is always easy to find, it is present in every thesis. The important task is to set limits and only include what is necessary in order to follow the progress of the project. Thus a brutal editing process is usually necessary. Do you think it is too hard to cut interesting stuff? Put it in an appendix!

Remember:

• What is interesting to you may very well be peripheral to others.
• Known technology does not belong in this chapter. Use references or write a short summary .

Pitfalls

• Leaving out reasoning or references because they are obvious. The thesis is not written for you, but for others that do not have your background.

Print Out Your Syllabus

and write extra notes and look for inter-syllabus dot point connections!

This is a step that I personally found very useful. Print out your syllabus and jot down the key points and tricks that you may need, or that you come across during your study.

This makes your study and revision time rather effective as you have a handwritten page of reminders and key points that you can look through before your exam!

This also helps when youre using your traffic light method highlighting the syllabus points you do not know at all and ones that you are really comfortable with. This printed syllabus can be used as a secondary notes pile to supplement your original notes.

Don’t Miss: Free Online College Algebra Course